Go Pro Firmware released! Finally :)

The folks over at Go Pro have been working very hard to get this firmware released and it’s finally here. Follow the link for further instructions etc.

From Go Pro’s website:

One Button Mode simplifies recording video and photos with your HD HERO. With One Button Mode, your camera will start recording video or photos automatically when you power the camera ‘ON’ and will only stop recording when you power the camera ‘OFF’. The shutter button is deactivated in One Button Mode. You can only turn the camera on and off, making it the perfect setting for loaning the it to friends or newbies.

Now you can take videos and photos with the camera mounted upside down without having to rotate the files later. In UPd, all videos and photos will be saved to your SD card right-side up.

Display live feed SD or HD video and audio straight out of the camera to a TV, handheld viewer, or video transmitter. Allows viewing a live video signal during preview, recording, and playback of saved files.

Display battery life, camera mode, and recording status icons on your live feed video signal with ‘On Screen Display’ turned on, or turn it off to transmit only the video without any status icons.

If you live in a PAL region (most regions outside of North America) you can now record in the PAL broadcast standard of 25 / 50 fps in the following resolutions:

r1 WVGA 50fps
r2 1280×720 25fps
r3 1280×720 50fps
r4 1280×960 25fps
r5 1920×1080 25fps

Go Pro firmware update


Comments

Powered by Facebook Comments

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *